Menu

×

Technical Information

BOND has worked with many clients over the years developing calibration hose and pre-liners for more specific applications using our many years of technical experience in this industry. We use only high technical performance materials in the production of all our drain-repair and calibration hose products. The base cloth of our PVC is a high tenacity polyester with flexible plasticized PVC coatings. Technical data for all weights of PVC are available stating tensile strengths, tear strengths and temperature stability, with BS standards where applicable. 

A selection of our popular calibration hoses are detailed below, however we supply a number of custom calibration hoses to a many of our clients so please do call us to discuss your specific requirements on 01453 767171.

Light Duty

High frequency welded only or stitched and welded PVC calibration hose. Diameter: 50mm (2in) to 200mm (8in). Recommended for both ambient and warm cure applications. Colour choices : green, blue, yellow + violet. PVC weight 400gsm.

Clear Medium Duty

Stitched and high-frequency welded PVC calibration hose. Diameter: 100mm (4in) to 300mm (12in). Recommended for both ambient and warm cure applications. Colour choice: Translucent. PVC weight 450gsm.

Medium Duty

High frequency welded only or stitched and welded PVC calibration hose. Diameter: 100mm (4in)to 300mm (12in). Recommended for both ambient and warm cure applications. Colour choice: Dark blue. PVC weight 610gsm.

Heavy Duty

Stitched and high-frequency welded. Diameter: 100mm (4in)+ Recommended for ambient and hot cure applications, including large diameters. Can also be used for steam cure. Can also be used as heavy duty pre liner. Colour choice: White

Please contact us for the specific technical data sheets for our products. The information above is just an indication of our capabilities and not a full product list. Do call to discuss your requirements, we can provide samples on request.

All technical data is supplied in accordance of the present standard of knowledge and not legally binding. Applications suggested do not release the customer from the responsibility to test any supplied materials for its intended application and usage in site-specific conditions to establish suitability.

Bond Fabrications Ltd can offer no warranty due to the multitude of factors that may impact the result of any application. This applies also to the marketability of the products and their suitability for a given purpose. The statements made herein cannot be regarded as representations or warranties and cannot be constructed as an invitation to infringe any proprietary rights, violate any laws, safety regulations or insurance provisions.

Top